PERANCANGAN MOULD PRODUK TUTUP GALON DISPENSER ANTI TUMPAH

  • Buyung Moslem Teknik Manufaktur / Fakultas Teknik Universitas Surabaya
  • Yon Haryono Fakultas Teknik Universitas Surabaya
  • The, Jaya Suteja Fakultas Teknik Universitas Surabaya
Abstract Views: 140 times
PDF - FULL TEXT Downloads: 457 times
Keywords: Designing, mould, anti-spilled dispenser gallon cap, injection moulding

Abstract

Anti-spilled dispenser galloncap product can’t be separate from human need for drinking water as a tool to help pouring water from gallon to dispenser without spilling the drinking water. The amount demand of those product is 25.000product per month with Rp 900,00 as the selling price. The purpose ofthis Final Project is to designing mould for anti-spilled dispenser gallon cap product within the specification of home industrial injection moulding machine. The result of mould designing is the mould consist of male, female, and stripper plate with the total dimension 200×105×150 mm.the mould have 2 cavity, a sprue and runnerswith total mass per injection 24,32 grams and the mould clamping force 8,9 tonnes. With those result is still under the capacity of the injection moulding machine. The mould having a cooling channel with the diameter is 10 mm and the length is 766 mm. The cooling channel is proved can handle to keep the mould in low temperature.Production cost for one product is Rp 303,00 so the product can be sell with lower price.

Downloads

Download data is not yet available.

References

Gastrow, Hans., et al., 1993, Injection Moulds, 2nd Edition, Hanser Publisher, Munich.

Sors, L., et al., 1981, Plastics Moulds and Dies, New York

Dym, Joseph B., 1987, Injection Molds and Molding : a Practical Manual, Van Nostrand Reinhold, New York.

Stoeckhert, K., 1983, Mould Making Handbook, Macmillan Publishing Co., Inc., New York.


Technical and Further Education Comission, Manufacturing and Engineering Educational Services., 2000, Mechanical Design Data Manual, Bankstown N.S.W., Chapter 15.

http://www.viewmold.com/Injection%20Mold%20Management/resin%20processing%20condition/LDPE%20processing%20condition.html diakses pada Senin, 15 Mei 2017, Pukul 22:25 WIB.

http://www.engineeringtoolbox.com/water-thermal-properties-d_162.html diakses pada Selasa, 16 Mei 2017, Pukul 10:45 WIB.

Uddeholm Corrax, 2007, Cutting Data Recommendation, Swedia.
Published
2018-03-01
Issue
Vol. 7 No. 2 (2019): Calyptra : Jurnal Ilmiah Mahasiswa Universitas Surabaya (Maret)
Section
Bidang Teknik Manufaktur (TR)

Creative Commons License

  • Articles published in CALYPTRA are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and the journal, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to CALYPTRA to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.
  • By publishing in CALYPTRA, authors grant any third party the right to use their article to the extent provided by the Creative Commons Attribution-ShareAlike 4.0 International license.