IMPLEMENTASI PENGENDALIAN KUALITAS MENGGUNAKAN PENDEKATAN SEVEN TOOLS PADA CV. PAKIS KARUNIA DI GRESIK

  • Selvi Wijaya Jurusan Manajemen Fakultas Bisnis dan Ekonomika Universitas Surabaya
  • Fitri Novika Widjaja Fakultas Bisnis dan Ekonomika Universitas Surabaya
  • Antonius Budhiman Setyawan Fakultas Bisnis dan Ekonomika Universitas Surabaya
Abstract Views: 450 times
PDF - FULL TEXT Downloads: 583 times
Keywords: Quality, Quality Control, Defective Product, Seven Tools

Abstract

The step of production process at CV. Pakis Karunia in Gresik, based on the type and amount of disability during the paper bag production process the company has experienced losses from the amount of production per month. Therefore, this study can be used to know implementation of quality control using seven tools. Analysis of quality control using seven tools such as check sheet, histograms, pareto diagrams, cause-effect diagrams, and control diagrams. The tools will be implemented into the CV. Pakis Karunia in Gresik. The results of histogram showing proportion defect in many variants. Fromcause-effect diagram the analysis, it can be seen the factors that cause defects in products derived from materials, machinery, human, work methods and environment, so that company can take corrective action to overcome it. From the analysis of the map control indicates that production is outside of the limits of control.

Downloads

Download data is not yet available.

References

Ahyari, A., 2002, Manajemen Produksi Perencanaan Sistem Produksi, Edisi Empat, Yogyakarta.

Assauri, S., 1998, Manajemen Operasi dan Produksi, Fakultas Ekonomi Universitas Indonesia, Jakarta.

Assauri, S., 2004, Manajemen Produksi dan Operasi, Fakultas Ekonomi Universitas Indonesia, Jakarta.

Gasperz, V., 2001, Total Quality Management, PT. Gramedia Pustaka Utama, Jakarta. Juran, 1999,

Juran’s Quality Handbook, Jilid Lima, Amerika.

Montogomery, D.C., 2009, Statistical Quality Control A Modern Introduction, John Wiley & Sons, Inc.

Nasution, M.N., 2015, Manajemen Mutu Terpadu, Ghalia Indonesia, Bogor.

Purnomo, H., 2003, Pengendalian Teknik Industri, Edisi 1, Graham Ilmu, Yogya.

www.ekonomi.kompas.com/read/2017/05/05/195600526/kuartal.i.2017.industri.manufaktur.mikro.dan.kecil.tumbuh.6.63.persen

www.kemenperin.go.id/artikel/4299/Struktur-Industri-Indonesia-Masih-Lemah

www.kemenperin.go.id/artikel/6276/Industri-Manufaktur-Indonesia-Mulai-Menggeliat

www.kompasiana.com/fuandh/gerakan-go-green-apa-hanya-menanam-pohon_552828a9f17e6157228b45ca

www.kompasiana.com/ukonpurkonudin/branding-usaha-tas-kertas-kantong-kertas-atau-paper-bag_5607cc3f5397738c07d91279

www.produksielektronik.com/pengertian-qc-7-tools-tujuh-alatpengendalian-kualitas/ diunduh pada tanggal 3 Oktober 2017

www.eriskusnadi.wordpress.com/2012/09/29/about-7-basic-quality-tools/

www.sites.google.com/site/kelolakualitas/Diagram-Stratifikasi

www.ilmumanajemenindustri.com/qc-seven-tools-tujuh-alat-pengendaliankualitas/

www.hardipurba.com/2008/09/25/diagram-fishbone-dari-ishikawa.html

www.sites.google.com/site/kelolakualitas/Control-Chart
Published
2018-03-01

Most read articles by the same author(s)

1 2 3 > >>